Flux Core Welding Wire E71T-11

Flux core welding wire E71T-11 E71T-11 is a self-protected flux-cored welding wire. It adopts DC positive connection and is suitable for all-position welding. Deposited metal has good low-temperature toughness and crack resistance and is used for single-track and multi-pass welding. Precautions:...

Product Details

Flux core welding wire E71T-11

      E71T-11 is a self-protected flux-cored welding wire. It adopts DC positive connection and is suitable for all-position welding. Deposited metal has good low-temperature toughness and crack resistance and is used for single-track and multi-pass welding.

Precautions:

(1) In order to prevent the generation of pores, remove the grease and rust on the surface of the base material before welding.

(2) Since the wire is softer than the solid wire, the pressure roller of the wire feeder should not be locked too tightly.


Deposited metal chemical composition

C

Si

Mn

P

S

Cr

Ni

Mo

V

Al

Cu

0.07

0.05

0.58

0.012

0.010

----

0.23

----

----

----

0.14


Deposited metal mechanical properties

Yield point

(Mpa)

Tensile Strength

(Mpa)

Elongation

(%)

Impact Value

(J)

Test Temperature

()

420

518

24

50

-30


Welding parameter suggestions:

Current range(A)

Φ0.8mm

Φ1.0mm

Φ1.2mm

Flat welding

 

80-160

100-220

140-280

Flat fillet welding

80-160

100-220

140-270

Horizontal welding

80-180

100-200

120-270

Overhead welding

80-180

80-200

120-270


voltage range(V)

Φ0.8mm

Φ1.0mm

Φ1.2mm

Flat welding

 

20-30

22-32

24-32

Flat fillet welding

20-28

22-30

24-32

Horizontal welding

18-28

22-30

22-32

Overhead welding

18-26

20-29

22-30



E71T-11+DA YANG.jpg

We are manufacturers in China,specialized in making flux cored welding wires for 25 years, welcome to contact with us .

Inquiry