Home > Knowledge > Content

Stainless steel wire

Feb 19, 2018

Stainless steel wire separable stainless steel solid wire and stainless steel flux cored wire.


Solid wire welding editor

Stainless steel solid wire can be used for inert gas shielded welding (TIG, MIG welding). Can also be used for submerged arc welding. Stainless steel MIG welding can achieve efficient welding, but also easy to automate welding, welding and sheet metal widely used in areas such as welding. MIG welding wire chemical composition and TIG welding wire, but for some stainless steel varieties, there is a high SI content of MIG wire, such as and ER308, ER309 wire corresponding to ER308Si, ER309Si, etc., due to containing Si up to about 0.8% Reduce the surface tension of the molten metal, the droplet particles become thinner, easier to achieve over-injection, the arc becomes more stable. At the same time, it can also improve the wetting property of the molten metal so as to make the weld bead beautiful and not easy to produce the defects of incomplete penetration, slag inclusion and porosity. Submerged arc welding of stainless steel solid wire, the chemical composition and gas-shielded stainless steel wire, but should be equipped with no fierce silicon or low-silicon manganese-free high melting flux.


Flux cored wire editor

Stainless steel flux cored wire can be like carbon steel and low alloy steel flux cored wire, both simple and efficient stainless steel welding, stainless steel flux cored wire is mainly MAG welding, MAG welding has the following characteristics: 1) Compared with manual welding, the deposition rate can be increased by 2-4 times, and the deposition efficiency is up to 90% (only 55% of the stainless steel welding rod) 2) The adaptability to current and voltage is large, the setting of welding conditions is easy and the semi- And automated welding. 3) good slag removal, weld surface gloss. In addition, little spatter, excellent arc stability, X-ray pass